used for the soft film ceiling
Item |
RGB or RGBW led block chain module for the soft film ceiling |
Voltage | 24V |
LED Type | 3030 RGB |
LED Qty/Module | 6leds/module or 8led optional |
Size | L 70mm* W 70 mm |
LED Modules/String | 20 modules/string |
Housing Body | aluminium |
Power | 6W/PCS |
IP | IP 20 |
color | RGB/RGBW/RGB addressable optional |
connector | 3/4pin JST female and male connector |
Description
These module extremly for backlighting like Channel letters application.
Each module sticked a 3M tape on back side of case it's chained by 20pcs.
You can cut down and every module addressable ,but watch the correct.Signal in and out put direction
The whole module covered by PVC injection coating and it's IP65 rated ,but the JST.
Connectors on start and end of string it's IP20 (support customization).
Control IC included, supporting numerous color-change effects.
Controlled by SD controller,Arduino,DMX512,Artnet.
Rigid white PCB, 24V 12V low voltage input.
Every 1 Leds linear separable, custom-length available.
Eco-green light, no UV, IR.
Extremely long lifespan &lower power
RGBtype
RGBW ( without ic )
TM1814 RGBW type
TM1934 dual signal RGB type
1916 ic with dual signal also
tm1934/tm1935/1916/GS8206 ic optional
Normal ws2811 ucs1903 sm16703 spi control optional
Normal RGBW color optional RGB+2700K/4000k/6000k
Other SPI type optional
Dmx512 type optional
SPI-dual sigal
RGBW led type
Dual white CCT led type
SPI dmx and normal RGB optional
dmx512 with tm512AC with 8 led
1935/1934 Ic chipset
TM1814 RGBW Type
Application
Other type optional
Application ( need to make sure the box deepth more than 15cm to use this led module block)
RGBW CCT 7070 led module
Application