Our DMX flexible led strip is super strong dmx signal strip with A,B signal parallel signal transfer. 5 cables ( PI/PO address writing wire, A(Dmx+),B(Dmx-),GND),
and DC24V,It can be cut ,can be parallel and series connection .
Product details
Product Name | RL-STR-dmx512-60-24V-10P-white |
LED Qty | 60leds/m |
DMX512 Qty | 10 pcs with 24V |
DMX channel | 30 channels with 24V |
PCB Width | 12mm wide |
Voltage | DC24V |
Watt | 14W |
PCB Color | White PCB Black PCB |
IP Rating | IP20/IP65/IP67/IP68 |
Controller | DMX512 Art-Net/DVI/DMX Controller |
Product Keywords | dmx512 120 led strip 4 pixels /m |
1. This Dc24V flex dmx digital led strip 60leds/M ,that different with normal SPI led pixel strips.
DMX512 led strips protocl is DMX512 that signal is parallel not series.
2. Its advantage is parallel DMX512 signal could avoid LEDs color influenced by the failure of one light in serial connection.
3. Entire DMX white digital led strip has 10 pixels with 24V ;60 white leds in a meter with 10mm width pcb board.
4. Communication between DMX512 RGB led digital tapes are synchronized perfectly under support of Artnet / DMX512 led controllers.
5. 24V 60 leds DMX white LED Pixel Digital strip need to write DMX address code via DMX address coder / controller.
6. Vivid lighting performance operated by Madrix software, Artnet / DMX512 led controllers.
7. 24V 60 leds DMX white LED Pixel Digital ribbon is flexible , bright, durable and easy for installation.
For bare board strip, you can use the 3M adhensive tape on back; For waterproof silicone tube strip.
there shipped with flexible silicon brackets and screws, the brackets fit over the waterproof sheath, it would be used to mount the led strips very well.
Advantages:
2unce PCB board with double cooper layer(hongqi brand 35um copper )
doublesides membrane cover the pcb board. make sure the copper no drop from the pcb board
It comes in 1 meters per reel with 5Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .
Flexible PCB material .every 6LED cab be cut with 24V;
120LEDs/M with 24V . 24V low voltage inputted , don’t over 25V , otherwise you will destroy the entire strip .
warranty: 3years
Original TM512 AC/UCS512HL IC chip with standard dmx512 signal ,,
Installing : screw+silicon clipand 3M adhesive on back side for sticky
Packaging
5m/roll 60rolls/ carton carton size: 48cm*48cm*28cm GW: 12.5kg with nonwaterproof Ip20
Waterproof IP grade
IP20 Non-waterproof with 3M sticker on the back, Size:5000*12*2.5mm
IP65 waterproof is silicone gel or epoxy on the surface,Size:5000*12*3mm
IP67: silicone tube,Size:5000*17*4mm
IP68: silcone gel(or epoxy) inside silicone tube.Size:5000*14*4mm
Product details
There is other white dmx512 Type optional!
There is one row dmx512 2835 pixel led strip optional too
RGB 5050 Type