sk6812 ws2812B RGB 5050 pixel LED Strip Dc5V 30 60 74 96 144 pixels per meter
below 60pixels is best seller --which we have a lot in stock
RL-STR-sk6812-5050RGB-60-5V.pdf
Advantages:
1.PWM refresh rate: 800kHz, transfer speed 800k bps
2. It comes in 1 meters per reel with 3Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .
3.Red copper bracket and pure gold wire RGBW led lamp,
4.High brightness LED lamp with luminous intensity(mcd)
R:700-1000 G:1500-2200 B:700-1000,
CCT for white optional from 2500K-12000K
5 hongqi brand 2OZ PFCB(35um cooper)with double cooper layer,
6. 2 sides membrane cover the PFCB. make sure the copper no drop from the pcb board ,
7. 30/60M . 5V low voltage inputted , don’t over 6V , otherwise you will destroy the entire strip .
8. Controller System:SD controller , DMX controller , Artnet and so on .(SPI protocel)
9. Installing : screw+silicon clipand 3M adhesive on back side for sticky
10.Packaging
5m/roll 60rolls/ carton carton size: 48cm*48cm*28cm GW: 12.5kg with nonwaterproof Ip20
Basis specification
Item name | sk6812 digital RGB flex led strip |
LED source | RGBW smd 5050 LED |
PCB width | 10mm/12mm 2OZ copper thickness |
Working voltage | DC5V |
Watts/M |
9.6W/M(30LEDs/M) 19.2W/M(60LEDs/M) 40W/M(144LEDs/M) |
Brightness(MCD) | R:700 G:1500 B:500 |
warranty | 2years |
IP rate | IP20, IP65, IP67, IP68. |
Led lighting angl | 120° |
PWM Rate | 800HZ |
Picture details